
| Parameter | Value |
|---|---|
| Grade Designation | M30 |
| Characteristic Strength (28 days) | 30 MPa |
| Cement Content (typical) | 360-380 kg/m³ |
| Water-Cement Ratio (max) | 0.45 |
| Slump | 75-150 mm |
| Maximum Aggregate Size | 20 mm |
| IS Standard | IS 456:2000 |
M30 grade concrete is required for high-rise buildings and structures exposed to aggressive environmental conditions. As per IS 456, M30 is the minimum grade for concrete in severe exposure conditions, which includes many coastal areas in Mumbai.
For residential towers above 10 floors, structural engineers typically specify M30 for columns and shear walls in the lower floors where loads are highest. The upper floors may use M25. Always follow your structural engineer's specifications exactly.
M30 requires careful quality control during production and placement. RMC is strongly recommended for M30 and above because achieving consistent strength with site-mixed concrete is very difficult at these grades.
Vasai-Virar is one of the fastest-growing residential markets in the MMR, driven by affordable housing demand. The Virar-Vasai East belt along the railway line has hundreds of under-construction buildings. Large township projects with 500-1000 units each are common. The area's relatively low land cost attracts budget-segment builders. Infrastructure improvements including road widening are supporting the growth.
“RMC M30 delivered to our Kharghar high-rise exactly on schedule. Slump test passed every time. We now source all our concrete through TMT BAR.”
Vasai-Virar in Thane (PIN: 401202) is 30 km from Bhiwandi Industrial Area. With next day delivery available, we ensure your ready mix concrete m30 reach your site on schedule. Vasai-Virar is one of the fastest-growing residential markets in the MMR, driven by affordable housing demand.
Ready Mix Concrete M30 in Vasai-Virar