
| Parameter | Value |
|---|---|
| Material | Galvanized Iron (zinc coated mild steel) |
| 18 Gauge Diameter | 1.22 mm |
| 20 Gauge Diameter | 0.91 mm |
| 22 Gauge Diameter | 0.71 mm |
| Coating | Hot-dip galvanized zinc coating |
| Tensile Strength | 350-550 MPa |
| Packaging | Coils of 25 kg bundle |
| IS Standard | IS 280:2006 |
GI binding wire is preferred over MS binding wire because the galvanized zinc coating prevents rusting and corrosion. This is especially important in Mumbai's humid and coastal climate where uncoated wire can rust within days.
For most construction work, 20 gauge is the standard choice. Use 18 gauge for heavy reinforcement (20mm bars and above) and 22 gauge for lighter slab work with thinner bars. The rule of thumb is: thicker the TMT bar, thicker the binding wire.
Buy in 25 kg bundles for the best rates. A typical residential project of 1000 sq ft requires approximately 15-20 kg of binding wire.
Dahisar is one of the last Mumbai suburban areas with available land parcels, making it an active construction zone. Several large township projects are underway in Dahisar East. The area along the Western Express Highway and Dahisar Check Naka sees continuous new residential development. Relatively affordable land rates attract mid-segment builders.
“We switched to TMT BAR for our 3-tower project in Panvel. JSW Neosteel delivered same-day with proper mill test certificates. Saved us 2 days of delays compared to our previous supplier.”
“As an architect, I recommend TMT BAR to all my clients. They stock all major brands, share test certificates proactively, and their pricing is transparent. No hidden costs.”
Dahisar in Mumbai (PIN: 400068) is 25 km from Bhiwandi Industrial Area. With same day delivery available, we ensure your gi binding wire reach your site on schedule. Dahisar is one of the last Mumbai suburban areas with available land parcels, making it an active construction zone.
GI Binding Wire in Dahisar